• Griffin Grove Gaming

    ((Our creative hub for tabletop gaming))

    Our Studio.

    Your idea, our equipment, your journey. From prototype to master through to production.

    Our Products.

    We design and produce a range of products, from figurines to bases, counters to tabletops.

    Our Stock

    We stock the product lines of more than a dozen family-run businesses like ours.

    Griffin Grove Gaming

  • Our Studio

    ((From idea to prototype to master to production))

    3D Printing

    3D Systems Projet 1500
    Producing 100 micron layers for high-quality protyping.

    3D Router.

    BilbyCNC 6040W Router
    A 1500w spindle allows carving in wood and aluminium.

    Laser Cutting/Engraving

    Trotec Speedy 300
    A 120w laser makes light work of thicker materials.

    Studio Tour

  • Plaster Casting

    ((Plaster: Because resin feels ten times cheaper and costs ten times as much))

    Mould Making.

    From design to master and from master to mould we make our moulds in silicone rubber.


    We manufacture plaster casts using USGS Hydrostone TB plaster, which is much harder than Plaster of Paris.


    Each kit contains all the plaster pieces needed to make one specific item.

    Plaster Tour

  • 1
  • 2
  • 3
  • All
  • ADBC
  • Building
  • Illustration
  • Painting
  • Tabletop
  • Thomarillion
  • Tournament
  • Default
  • Title
  • Date
  • Random
  • Learn more about our Isometric Dungeon project for Campaign Cartographer 3.
    Read More
    • Building
    • Illustration
    • Tabletop
  • Looking for artwork for your next gaming session -- or your next game? Follow the process we used for this illustration...
    Read More
    • Illustration
  • The Adelaide Dungeon Bowl Competition culminates each year with a game on the grand final table. See how that table has evolved over the years...
    Read More
    • ADBC
    • Building
    • Tournament
load more hold SHIFT key to load all load all

Studio Tour

“If all you had was academic ability, you wouldn't have been able to get out of bed this morning. In fact, there wouldn't have been a bed to get out of. No one could have made one. You could have written about the possibility of one, but not have actually constructed it.”
Ken Robinson, Out of Our Minds: Learning to Be Creative

So, You Want To Get Started In Design...?

It is a Catch-22 situation. You want to try your hand at design. You might find that you have a talent for it and you certainly have a desire to give it a try. On the one hand you don't want to spend the big dollars required to buy software, or equipment, or attend formal courses, until you know you can do it and that you want to do it. On the other, you won't know whether you can do it or want to do it on an ongoing basis until you've spent a reasonable amount of time doing it.

There is a way out of this situation.

We have the equipment. We have the licensed software. We have the asset libraries. For an hourly fee you can access our studio and use all of our equipment. The only additional cost is the replacement cost of consummables (the material used by the 3D printer, for example).

We'll show you how to use the equipment, we'll get you started with the software, and we'll answer your questions when they arise. We'll act as mentors, but not as teachers.

Our Studio

When we designed our studio we wanted to ensure we could cater for the entire production workflow, from the earliest design stage all the way through to low-volume commercial production. The design and development section of our studio is 48 square meters, our production section is 36 square meters. While they are in the same building they are completely separate. The production section contains everything that produces a mess!


Through our studio you can access:

  • Adobe Photoshop CC
  • Adobe Illustrator CC
  • Artsoft Mach3
  • Corel Draw X5
  • e-onsoftware Vue 11
  • Google Sketchup Pro 2013
  • Pixologic ZBrush 4R6
  • Smith Micro Poser Pro 2014

We have extensive asset libraries available for these applications. We also have training courses available that allow you to learn at your own pace.

3D Printing

3D Systems produce the Projet series of 3D printers. What attracted us to the Projet was the finish quality on the models. It is excellent - smooth where it is supposed to be, sharp where it is supposed to be, never jagged or rough. Layer thickness is 0.004 inches (roughly 0.1mm or 100 microns).

3D Routing

The BilbyCNC 6040W 3D Router has a 1500w spindle. It will take a workpiece up to 450mm x 750mm x 90mm in size. It can be used to mill aluminium as well as wood.

Laser Cutting/Engraving

Laser engravers produce unrivalled accuracy and repeatability in the cutting and engraving of wood and other materials.

Vacuum Chamber

We have a vacuum chamber available for de-gassing. It is perfect for mould-making and casting as it removes gasses from the mix.

Spin Casting

We are looking to acquire spin casting equipment in 2014. At this stage it looks likely to be something from Tekcast in the US.


We specialise in the art of photographing very small things very well. If you have something that is less than 300mm x 300mm x 3000mm in size then we have the equipment to light and photograph that object.

“Imagination is the source of every form of human achievement. And it's the one thing that I believe we are systematically jeopardizing in the way we educate our children and ourselves.”
Ken Robinson

Your Search